1 – 8
Chapter 1 Troubleshooting
STATUS 3-6
Paper Size Mismatch
- Paper size detected by the Paper Size
Switch or set in the NVRAM does not
match the paper length obtained from ON
time of Regi Sensor at feeding.
FIP1.12
STATUS 15-1 Xero Warning
- Remaining toner in EP CARTRIDGE
became low.
FIP1.16
STATUS 15-3 Near end of paper in Tray 4 - Remaining paper in Tray 4 became low.
FIP4.3
STATUS 15-4 Near end of paper in Tray 3 - Remaining paper in Tray 3 became low.
FIP4.3
STATUS 15-5 Near end of paper in Tray 2 - Remaining paper in Tray 2 became low.
FIP1.15
STATUS 15-6 Fuser Life Warning
- Fuser printed more than 200,000 sheets
of paper.
FIP1.17
STATUS 16-1 Face Up Tray Fail
- Face Up Tray is not correctly installed in
Duplex or OCT mode.
FIP1.44
STATUS 16-3 Option Tray Unit Fail
- Option Tray is not installed when Option
Tray is selected.
FIP4.4
STATUS 16-4 Full Stack (500 Paper Exit)
- 500 Paper Exit became Full Stack.
FIP1.45
STATUS 16-5 Full Stack (OCT)
-Option OCT became Full Stack.
FIP3.6
STATUS 17-1 Top/Rear Cover Open
-COVER OPEN or COVER REAR 500 is
open.
FIP1.6
STATUS 17-2 OCT Cover Open
- Cover of Option OCT is open.
FIP3.1
STATUS 17-3 Duplex Cover Open
-Cover of Option Duplex is open.
FIP2.1
STATUS 17-4 Inappropriate Opt FDR
- Inappropriate Option Feeder
is detected.
FIP4.5
STATUS 17-5 OCT Unit Fail
- Option OCT is not installed when OCT
mode is selected.
FIP3.2
FIP3.7
STATUS 17-6 Duplex Unit Fail
- Option Duplex removed after powering
on.
FIP2.2
FIP2.7
STATUS 21-1 Illegal Size (Duplex/OCT)
- Paper size that is not supported in Duplex
or OCT mode is selected.
FIP2.6
FIP3.5
STATUS 21-3 NO Paper in Tray 4
-No paper in Tray 4
FIP4.2
STATUS 21-4 NO Paper in Tray 3
-No paper in Tray 3
FIP4.2
STATUS 21-5 NO Paper in Tray 2
-No paper in Tray 2
FIP1.14
STATUS 21-6 NO Paper in Tray 1
-No paper in Tray 1
FIP1.14
Status Code
Error Contents
Error Description
FIP to be
referenced
