Oki B412dn User Manual Download Page 554

Page: 554 / 637

About Administrator Menu Items and Functions in the Printer (BOOT MENU)

You can enable or disable each category, and set other settings. Disabled categories are not displayed.

Turn the printer off.

Turn on the printer while pressing (OK).

Press (OK).

Enter the administrator password.

The factory default password is "aaaaaa".

Press or to display an item to set, and then press (OK).

Change the setting, and then press (OK).

[*] is added to the right side of the setting.

Press

(ONLINE) to switch to [READY TO PRINT].

Item

Setting

Default

setting

Description

WIRELESS MODULE

ENABLE
DISABLE

DISABLE

Sets whether to enable or disable the wireless LAN module.

SIDM MENU

SIDM MANUAL

ID#

0 to 9

Sets # that specifies a manual feed tray with the FX/PPR paper source

specification command.

SIDM

MANUAL2 ID#

0 to 9

Sets # that specifies a manual2 feed tray with the FX/PPR paper source

specification command.

SIDM MP TRAY

ID#

0 to 9

Sets # that specifies the MP tray with the FX/PPR paper source

specification command.

SIDM TRAY1

ID#

0 to 9

Sets # that specifies Tray 1 with the FX/PPR paper source specification

command.

SIDM TRAY2

ID#

0 to 9

Sets # that specifies the second tray unit with the FX/PPR paper source

specification command.
This is displayed only if the optional second tray unit is installed.

MENU LOCKOUT

ENABLE
DISABLE

DISABLE

Sets whether to enable or disable the MENU LOCKOUT function.
If ENABLE is set, the menus other than [STORED JOB] are hidden.

PANEL LOCKOUT

MODE1
MODE2
OFF

OFF

Sets whether to enable or disable the PANEL LOCKOUT function.
MODE1: Only the ONLINE, OK, CANCEL, and POWER SAVE buttons are

enabled.
MODE2: Only the ONLINE and OK buttons are enabled.
OFF: All the buttons are enabled.

MENU OPERATION

SETUP

UP/DOWN KEY NORMAL

TYPE
OLD TYPE

NORMAL

TYPE

Sets the operation of and

on the operator panel.

NORMAL TYPE :

displays the previous item.

displays the next item.

OLD TYPE :

displays the next item.

displays the previous item.

553

Summary of Contents for B412dn






























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for B412dn

Reviews:

Oki B412dn, User Manual, Page: 554 / 637

Search results

Summary of Contents for B412dn

Reviews: