-
11
-
2. Use UP / DOWN / LEFT / RIGHT] key to select a camera channel
3. Select
channel to add a new camera; OR
4. Select
channel to replace current camera
5. Make sure the camera is connected to power source – Power LED turns RED,
then BLUE signal LED ON or Flashing. Press [ENTER] key to start pairing.
Label changes to
6. Now press the camera “Pairing” button (See section 1, camera image) to pair
with the NVR
7. When pairing succeeds, label changes to
8. If paring fails, label changes to .
Then user has to check
again the camera and the NVR condition.
Note:
During first pairing, the camera registered to channel 1 will be camera #1, to
channel 2 will be camera #2… and so on
If camera is paired to replace existing camera, the existing camera will
become non-paired and lose pairing information
If existing camera is paired to another channel, the original channel will
become NO PAIR
