Oilon GKP-50 MH, Operation And Maintenance Manual

Page: 6 / 100

Note indicates tips, hints, and other essential information.
Keep these instructions as well as the electrical diagrams available near the
device.
Oilon products are manufactured according to general product standards and
directives, and based on our best knowledge about product design, and technologies.
Operation safety is one of the leading principles in our product development. However,
it is wise to be prepared, and think about safety. Read the following principal safety
warnings and instructions:
Installation, commissioning, or service of the appliance is to be carried
out by authorized and trained personnel only, adhering to all local
regulations and requirements.
The equipment shall be installed in accordance with the Provincial Installation
Requirements, or in their absence, the CGA B149.1 and B149.2 Installation Codes
shall prevail.
IN CASE OF FIRE OR OTHER EMERGENCY
● Cut off power supply.
● Close main fuel shut-off valve.
● Take appropriate actions.
● Contact operation controller.
IN CASE OF A GAS LEAKAGE
● Do not light fire or touch electric equipment.
● Close main fuel shut-off valve.
● Make sure there are no people in the leakage area.
● Make sure the leakage area is properly ventilated.
● Contact operation controller.
Cut off power supply to burner and close manual shut-off valves always
before any maintenance work. Cutting power is adequate when just
inspecting the device.
Connectors in control box are under voltage. Only authorized users may
open safety cover.
Fasten all safety covers, enclosures, and guards with all screws before
start-up. Use appropriate tools.
Wear proper hearing protection and personal protective equipment,
such as protection shoes and gloves when necessary.
4 (95) M5164 1640EN