IF THIS EQUIPMENT IS NOT INSTALLED, OPERATED AND MAINTAINED IN
ACCORDANCE WITH THE MANUFACTURERS INSTRUCTIONS, THIS PRODUCT
COULD EXPOSE YOU TO SUBSTANCES IN FUEL OR FROM FUEL COMBUSTION
WHICH CAN CAUSE DEATH OR SERIOUS ILLNESS AND WHICH ARE KNOWN TO
CAUSE CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.
IMPROPER SERVICING OF THIS EQUIPMENT MAY CREATE A POTENTIAL
HAZARD TO EQUIPMENT AND OPERATORS.
SERVICING MUST BE DONE BY A FULLY TRAINED AND QUALIFIED PERSONNEL.
WARNING
DO NOT ATTEMPT TO START, ADJUST OR MAINTAIN THIS BURNER WITHOUT
PROPER TRAINING OR EXPERIENCE. FAILURE TO USE KNOWLEDGEABLE
TECHNICIANS CAN RESULT IN EQUIPMENT DAMAGE, PERSONAL INJURY OR
DEATH.
1.3 Product overview
Intended use
This is an automatic forced draught burner. The burner can be used on most heating
appliances; for warm and hot water boilers, hot air generators, and various types of
process heating. They are also designed to suit furnaces with high back pressure.
The burners can be mounted in horizontal, vertical and upward facing, or vertical and
downward facing orientation. Our burners are designed for operation in covered areas,
within the temperature range of 0 °C – +50 °C / + 32 °F – 105 °F. The standard setup is
designed to operate in the altitude of max. 500 m / 1,640 ft above sea level.
See
Technical data
for the information on standard applicable fuels. Burners using
other fuels are available upon request.
Construction
The surface of the housing is finished with durable high-gloss paint. Electrical
installations and burner service are easy to perform because the top cover is
removable. The stainless steel alloy combustion head and the diffuser disc can
withstand high temperatures.
The burner control system handles all burner operation sequences automatically. In the
event of a burner failure, the unit stops the burner automatically.
Each burner is tested separately before delivery to the customer.
For more information on products, visit our web site at
:
Oilon –>
Industries –> Product material
.
Information on components can be found under the headline
Burner parts
.
6 (95)
M5164 1640EN
Summary of Contents for GKP-50 MH
Page 2: ......
Page 21: ...3 3 Installing burner GKP 50 MH main dimensions D048897 ver 3 M5164 1640EN 19 95...
Page 98: ...96 95 M5164 1640EN...
Page 99: ......
