Oilon GKP-350 M, Operation And Maintenance Manual

Page: 59 / 134

OilStage1/Mod Hours run oil stage 1 or
modulating (selectable)
OilStage2 Hours run oil stage 2
(selectable)
OilStage3 Hours run oil stage 3
(selectable)
TotalHoursReset Hours run total (can be
reset)
TotalHours Hours run total (read
only)
SystemOnPower Hours run device under
voltage (read only)
StartCounter Displaying the start
counter readings
GasStartCount Number of startups gas,
start counter (selectable)
OilStartCount Number of startups oil,
start counter (selectable)
TotalStartCountR Total number of startups,
start counter (can be
reset)
TotalStartCount Total number of startups,
start counter (read only)
Fuel Meter Displaying the current
counter readings
Curr Flow Rate Current fuel throughput
Volume Gas Fuel volume gas (read
only)
Volume Oil Fuel volume oil (read
only)
Volume Gas R Fuel volume gas
(resettable)
Volume Oil R Fuel volume oil
(resettable)
Reset Date Gas Reset date fuel volume
gas
Reset Date Oil Reset date fuel volume
oil
LockoutCounter Total number of lockouts
that occurred (read only)
O2 Module
Actual O2 Value Actual O2 value
O2 Setpoint O2 setpoint
SupplyAirTemp Supply air temperature in
°C / °F
FlueGas Temp Flue gas temperature in
°C / °F
CombEfficiency Combustion efficiency
BurnerID Identification of burner
OptgModeSelect Operating mode selection
of AZL5... for serial port
and eBus
InterfacePC Setting the serial port
(RS-232) of the AZL5... to
interface operation for PC
tool
GatewayBASon Activating the eBus port
M5178 1647EN 57 (129)