Ohyama woozoo IPE-1221G, User Manual, Page: 9 / 120

5
EN EN
+ / - button
Swing indicator
Swing button
Dual-8 nixie tube
3
Operation of control panel
Fan button
Operation Introduction for Control Panel
2
+ / - button
auto fan
medium speed
high speed
4 Mode button
Name of control panel
Dry mode indicator
ON/OFF button
Timer indicator
Cool mode indicator
Fan button
Fan speed indicator
low speed
Mode button
Fan mode indicator
Timer button
NOTICE
5
Timer button
Press this button and the fan speed will circulate as:
Press this button and the mode will circulate as:
(IPE-1221GH Model only)
1
ON/OFF button
Pressing this button can turn on or turn off
the air conditioner.
6 Swing
Under cooling or heating mode, press “+" or
“-" button to increase or decrease set
temperature by 1°C(°F). Set temperature
range is 16°C(61°F)~30°C(86°F) . Under
auto, dry or fan mode, this button is invalid.
Cool: Under this mode, cool mode indicator is
bright. Dual-8 nixie tube displays set tempera-
ture.Temperature setting range is
16°C(61°F)~30°C(86°F).
Dry: Under this mode,dry mode indicator is
bright. Dual-8 nixie tube won't display.
Fan: Under this mode, the air conditioner only
blow fan. Fan mode indicator is bright.
Dual-8nixie tube won't display.
Heat (IPE-1221GH Model only) : Under this
mode, heating mode indicator is bright. Dual-8
nixie tube displays set temperature.Tempera-
ture setting range is 16°C(61°F)~30°C(86°F).
Press this button, horizontal louver of air
conditioner will swing up&down automatically.
Single press it to switchover between on and off.
Press this button and the mode will circulate
according to below sequence:
Press timer button to enter into timer setting
mode. Under this mode, press "+" or "- "
button to adjust the timer setting.Timer setting
will increase or decrease 0.5 hour by pressing
" + " or " - " button within 10 hours, while timer
setting will increase or decrease 1 hour by
pressing"+" or " - " button beyond 10 hours.
After timer setting is finished, the unit will
display temperature if there's no operation for
5s. lf timer function is started up, the upper
indicator will keep the display status. Others, it
won't be displayed. Under timer mode, press
timer button again to cancel timer mode.
Heat mode indicator
(IPE-1221GH Model only)
Cool
Heat
Dry
Fan
● After putting through the power,the air conditioner will give out a sound. After that,you can operate the air conditioner by the control
panel.
● Under ON status, after each pressing of the button on control panel, the air conditioner wiil give out a sound. Meanwhile, coresponding
indicator on control panel will be bright.
● Under OFF status, dual-8 nixie tube on control panel won't display.Under ON status, dual-8 nixie tube on control panel will display set
temperature under cooling mode and Heating mode IPE-1221GH Model only, while it won't display under other modes.
Introduction for icons on display
screen
Buttons on remote controller
Operation and introduction of remote controller
MODE
SWING
TIMER
T-OFF
COOL
DRY
LOCK
AUTO
H
OPER
COOL
AUTO
FAN
SWING
LOCK
DRY
T-OFF
OPER
H
HEAT
T-ON
SLEEP
SPEED
Auto mode
Cool mode
Dry mode
Fan mode
Heat mode
Timer on
Timer off
Swing operation
Sleep operation
Lock
Set speed
Set temperature
Set time
Send signal