－
16
－
◆
Replacement of the main motor unit
Replace the motor after it is damaged.
* Remove the cover from the body.
(During removal, as in the diagram on the right, the cover
mounting screws should be removed together with the front
cover, leaving the four screws of the rear in place.)
* Remove the motor trunk connector.
* Remove the motor mounting screws on the motor’s
bottom face.
* Pull out the motor section from the rear of the body.
(To facilitate removal, insert a hexagonal wrench or the like
into the long hole of the body base and push the motor mount-
ing bracket backward.)
* Be careful not to break motor wires by using overly
excessive force.
Caution:
Unplug the AC adapter from the wall outlet before
disassembly of the motor section.
Main motor unit
Remove the motor mounting
screws
(2.6mm
×
8mm, 2 pieces)
The long hole
Push the motor mounting
bracket backward.
Pull out the motor section
from the rear of the body.
Remove the cover
