－
14
－
◆
Replacement of the bit guide unit
Replace the holding plate when there is difficulty in using it, such as
after excessive wear.
When replacing the holding plate, remove the bit guide section off
the body to prevent a mounting screw from falling inside the body.
* As in the diagram on the right, remove the bit guide section and
replace the holding plate.
* Refer to P. 5, “Check/adjustment of the holding plate” for mounting
adjustments.
Part number of bit guide unit:
ＮＳＢ０６００３
◆
Replacement of the bit guide assembly
Replace the bit guide when there is difficulty in using it, such as af
-
ter excessive wear.
* As in the diagram on the right, remove the mounting screws and
replace it.
* Refer to P. 7, “Check/adjustment of the bit guide” for mounting
adjustments.
Part number of bit guide assembly:
ＮＳＢ０６００２
Remove the bit guide.
Screws for
adjustment,
2 pieces
Remove the
bit guide.
Fixing screws,
2 pieces
