OHAUS T71P, Service Manual

Page: 26 / 48

CHAPTER 1
GETTING STARTED
Ohaus Corporation www.ohaus.com 1-20 7000 Series T71 Indicator Service Manual
1.9.3 Output Format
The Result Data is output in the following format.
TABLE 1-6. DEFAULT SERIAL OUTPUT FORMAT
Field: Label
1
Space
2
Weight
3
Space
2
Unit
4
Space
2
Stability
5
Space
2
G/N
6
Space Term Characters
Length: ≤
11
≤
1
9 ≤
1
≤
5
1 ≤
1
≤
1
≤
3
≤
1
0 ??
Notes:
1. In certain cases, a Label field of up to 11 characters is included. –
2. Each field is followed by a single delimiting space (ASCII 32).
3. The Weight field is nine right-justified characters. If the value is negative, the “– “
character is located at the immediate left of the most significant digit.
4. The Unit field contains the unit of measure abbreviation, up to five characters.
5. The Stability field contains the “?” character if the weight reading is not stable. The
Stability field and the following Space field are omitted if the weight reading is stable.
6. The G/N field contains the net or gross indication. For net weights, the field contains
“NET”. For gross weights, the field contains nothing, “G” or “B”, depending on the
GROSS INDICATOR menu setting.
7. The Termination Characters field contains CRLF, Four CRLF or Form Feed (ASCII 12),
depending on the LINE FEED menu setting.
For more information, see the Instruction Manual.