OHAUS T71P Instruction Manual Download

Page: 56 / 72

EN-54 7000 Series Indicators

PC003

SAVE RECORD?

P.tArE

0.000 KG

P.tArE

1.000 KG

1.000

0.000 KG

1.000

1.000 KG

StAtS

N 1

StAtS

TOT 1.000

StAtS

STD 0.000

StAtS

MIN 1.000

StAtS

MAX 1.000

StAtS

DIFF 0.000

StAtS

AVG 1.000

StAtS

CLEAR STATS?

1.000

0.000 KG

If desired, edit the displayed data value using the keypad. Then press the

Yes

button.

After all data types have been viewed, press the

Yes

button to save the changes.

4.11

Accumulation and Statistics

The Accumulation feature enables manual or automatic totalizing of displayed values. Statistical data

is stored in memory for review and printing.

NOTES:

ACCUMULATE must be set to MANUAL or AUTO in the SETUP menu.

The Accumulation function is available in Weighing, Counting, Dynamic and Check Weighing
modes. Accumulation data is stored separately for each mode.

To include the statistics data when printing, INFORMATION must be set to ON in the PRINT

CONTENT menu.

4.11.1

Accumulating Displayed Values

With ACCUMULATE set to MANUAL, place the item on the scale and press the

FUNCTION

button to

accumulate the displayed value.
With ACCUMULATE set to AUTO, place the item on the scale. The displayed value is accumulated

automatically.
The accumulated value is displayed on the second line.

4.11.2

Viewing Statistics Data

To view the statistics data, press the

INFO

button. The following statistics data will be displayed

momentarily: number of weighings, total, average, standard deviation, minimum, maximum, and
difference.

4.11.3

Clearing Statistics Data

To clear the accumulation value and statistics data, press the

CLR

button while the statistics

information is being displayed. When the display shows CLEAR STATS?, press the

Yes

button to

clear the statistics data or press the

button to keep the statistics data.

Summary of Contents for T71P









































































Search results

Summary of Contents for T71P

Reviews:

Related manuals for T71P

Brands by name

Popular brands

OHAUS T71P, Instruction Manual

Search results

Summary of Contents for T71P

Reviews:

Related manuals for T71P

Brands by name

Popular brands