OHAUS T71P, Instruction Manual

Page: 40 / 72

EN-38 7000 Series Indicators
ALt.CmM
ZERO
Z
ZErO
A
T-S-S
S-S
FUNCTION
PRINT
ZERO
COmM1
END COM1
mMENU
I-O
I-O
RESET
YES
rESEt
NO
I-O
INPUT
TARE
INPUt
OFF
I-O
INPUT BEEP
ON
IN.bEEP
OFF
Alternate Zero Command
Set the alternate command character for Zero.
Settings of A to Z are available. The default setting is Z .
3.10.8 End COM1, End COM2
Advance to the next menu or return to the top of the current menu.
3.11 I-O Menu
Enter this menu to set the optional input and output device parameters.
3.11.1 Reset
Reset the I-O menu to the factory defaults.
NO = not reset
YES = reset
3.11.2 External Input
Set the function to be controlled by an optional external input device, such as a footswitch.
OFF = disabled
TARE = equivalent to pressing the TARE button.
ZERO = equivalent to pressing the ZERO button.
PRINT = equivalent to pressing the
PRINT
button.
FUNCTION = equivalent to pressing the FUNCTION button.
S-S = when the optional relay pc board is installed, the first external
input changes the state of the relay; the second external input
returns the relay to the original state (START-STOP).
T-S-S = when the optional relay pc board is installed, the first external
input changes the state of the relay; the second external input
returns the relay to the original state (TARE-START-STOP).
3.11.3 Input Beep
Set the beeper response to an external input.
OFF = the beeper does not sound.
ON = the beeper sounds.