OHAUS Ranger R41MEB, Instruction Manual

Page: 20 / 39

Ranger
™ 4000 Series EN 18
End Mode [
End
]
Advance to the next menu or return to the top of the current menu.
4.6 Unit Menu
This menu activates units so they will be accessible with the Units button. The units in the menu
m
ust be turned “on” to be active.
Note: Available units vary by model and local regulations.
4.7 Print1 Menu
Enter this menu to set printing parameters. Default settings are bold .
Note: The Print2 menu is only displayed if a second interface is installed.
Reset [ reset ]
Reset the Print menu to factory defaults.
NO = no reset
YES = reset
Stable Only [ Stable ]
Set the printing criteria.
OFF = values are printed immediately
ON = values are only printed when the stability criteria are met
Auto Print [ A.Print ]
Set the automatic printing functionality.
OFF = disabled
ON.STAB = printing occurs each time the stability criteria are met
INTER = printing occurs at the defined interval
ACCEPT = printing occurs continuously
CONT = printing occurs each time the display is within the Checkweigh accept
Reset: no , yes
Stable Only: off , on
Auto Print: off
on stable
interval
continuous
accept
Content: Result (-> off, on )
Gross (-> off , on)
Net (-> off , on)
Tare (-> off , on)
Header (-> off , on)
Footer (-> off , on)
Mode (-> off , on)
Unit (-> off, on )
Info (-> off , on)
Accu (-> off , result, all)
Layout: Format (-> S ,M)
Feed (-> Line , 4 Lines, form)
Data Transfer: off , on
End Print: Exit menu