OHAUS Ranger R41MEB, Instruction Manual

Page: 25 / 39

EN 23 Ranger
™ 4000 Series
Lock Mode [
l.mMod
]
Set the status.
OFF = Mode menu is not locked
ON = Mode menu is locked
Lock Unit [
l.Unit
]
Set the status.
OFF = Unit menu is not locked
ON = Unit menu is locked
Lock Print
Set the status.
OFF = Print menu is not locked
ON = Print menu is locked
Lock COM [
l.COmM
]
Set the status.
OFF = COM menu is not locked
ON = COM menu is locked
End Lock [
End
]
– Advance to the next menu or return to the top of the current menu.
4.10 End Menu
Press ‘Yes’ to advance to the Calibration menu. Press ‘No’ to exit the menu and return to the
current application mode.
4.11 Additional Features
The Weigh Below Hook is provided with the scale. To use this feature, remove power from the
scale and remove the protective cover for the weigh below opening. Install the hook into the
access hole at the bottom of the scale as shown. Do not over tighten, tighten finger tight. Mount
the scale onto an appropriate assembly that allows free working space below the hook. See
figure 4-1.
Note: Never allow the scale to rest directly on the hook.
Figure 4-1. Setup for the Weigh Below Hook
Weigh Below Hook
Access