OHAUS Ranger R41MEB, Instruction Manual

Page: 17 / 39

EN 15 Ranger
™ 4000 Series
Zero Range [
ZErO
]
Set the percentage of scale capacity that may be zeroed.
2% = zero up to 2 percent of capacity
10% = zero up to 10 percent of capacity
Auto Tare [
A.tArE
]
Set the automatic tare functionality.
OFF = Automatic Tare is disabled
ON = the first stable gross weight is tared
ON-ACC = stable gross loads within the accept limits are tared (in Check weighing mode)
Beeper Signal [
Bp.sIG
]
Set how the beeper responds in Check Weighing mode.
OFF = the beeper is disabled
ACCEPT = the beeper will sound when the weight is within the Accept range.
UNDER = the beeper will sound when the weight is below the Under setting.
OVER-
UNDER = the beeper will sound when the weight is above the Over setting.
OVER = the beeper will sound when the weight is below the Under setting or above the
Over setting.
Beeper Key [
BP.key
]
Set whether the beeper sounds when a button is pressed.
OFF = no sound
ON = sound
Accumulation [
aCCUmM
]
Set the accumulation functionality.
OFF = accumulation disabled
AUTO = automatic accumulation
MAN = manual accumulation
End Setup [ End ]
Advance to the next menu or return to the top of the current menu.
4.4 Readout Menu
Enter this menu to set user preferences. The LCD and LED displays will have different
menu items or settings based on the functionality.
Reset [ reset ]
Reset: no , yes
Stable Range: 0.5, 1 , 2, 5
Filter: low, medium , high
Auto-Zero
Tracking:
off, 0.5 , 1, 3
Light (LCD): off, on, auto
(LED): low, medium , high
Sleep: off , on
Auto off: off , 1, 5, 10
End Readout: Exit menu