OHAUS M30C250B2, Operating And Maintenance Manual, Page: 17 / 18

17
Assistance Center".
7.7 - LUBRICATION OF SLIDING GUIDES
Occasionally put a few drops of oil (using the oil dispenser shipped with the machine)
on the round bar which slides the carriage back and forth. Do so through the hole
(OIL) on the side with the thickness knob.
CHAP. 8 - DISASSEMBLY
8.1 - OUT OF SERVICE
If you decide to put the machine out of service for whatever reason, make sure it is
unusable by any and all personnel:
unplug and switch off the power supply.
8.2 - WEEE Electronic-disposal, waste electrical and electronic equipment
In accordance with article 13 of Legislative Decree n. 151 of 25 July 2005,
"Implementation of Directives 2002/95/CE, 2002/96/EC and 2003/108/EC,
regarding the reduction of the use of hazardous substances in electric and
electronic equipment, as well as waste disposal".
The symbol of the checked box on the equipment or the packaging indicates that the
product must be disposed of separately, not with regular waste, at the end of the
product's working life.
Recycling of this machine at the end of its working life is organized and carried out by
the manufacturer. Any user who wishes to dispose of this machine must contact the
manufacturer and follow the procedure that has been put in place for the recycling of
the machine at the end of its working life.
Appropriate collection of the machine for recycling and environmentally safe disposal
contributes to avoiding possible harm to health and the environment and favors reuse
and/or recycling of the material the machine is made of.
Illegal disposal of the machine by the holder will be penalized by the administrative
sanctions provided for by law.
4
6.2.4 - nettoyage du protège-tranche
CHAP. 7 - MAINTENANCE p. 16
7.1 - GENERALITES
7.2 - COURROIE
7.3 - PIEDS
7.4 - CABLE D'ALIMENTATION
7.5 - LAME
7.6 - MEULES
7.7 - LUBRIFICATION DES RAILS
CHAP. 8 - ELIMINATION p. 17
8.1 - MISE HORS SERVICE
8.2 -
DEEE Déchets d'Equipements Électriques et Électroniques