OHAUS GT 210, Directions For Use And Instructions For Installation

Page: 85 / 121

46
MENUS
Unit Selection (Cont.) Unit Selection (Cont.)
Unit Selection (Cont.) Unit Selection (Cont.)
Unit Selection (Cont.)
Functions Functions Functions Functions Functions
The Functions submenu permits the selection of only one function. These functions
are: Percent, Parts Counting. Check Weighing, Animal Weighing, FillGuide
TM
, High
Point or None. The default setting is none none none none none.
Only one one one one one function at a time can be
selected for balance operation.
Selection of a function, other than None or Percent,
requires additional selections to that function be reviewed in the section titled Setup
Options.
1. Access the submenu.
2. .
3. , ,
, , ,
.
4. .
Taels Taels Taels Taels Taels
If taels are enabled, choose one of three different taels: Hong Kong, Singapore, or
Taiwan.
1. .
2. (Hong Kong),
(Singapore), or (Taiwan).
3. .
To view or change the various weighing units:
1. Access the submenu.
2. .
3. or .
4. for next unit status.
5. Repeat steps 2 through 4 for each unit.
6. .