OHAUS GT 210, Directions For Use And Instructions For Installation

Page: 116 / 121

ENTER THE MAIN MENU
Press and hold , release when MENU is displayed. The calibration menu
CAL is automatically displayed after MENU. CAL is one of the four primary menus
used in the balance. The primary menus are: CAL, USER, SETUP and PRINT.
CHANGE PRIMARY MENUS
When the CAL menu is displayed, each press of places the balance in the
next menu as follows: USER, SETUP, PRINT, END and back to CAL.
ENTER THE SUBMENUS
Pressing when in a primary menu places the balance in the first parameter
which can be set in that submenu. For example, when in the USER primary menu,
the first parameter in that submenu is RESET. To access each of the remaining
parameters, simply press once for each parameter. Repeated pressing
of cycles through all of the parameters.
SET BALANCE PARAMETERS
After a parameter has been accessed in the submenu, for example RESET, press
to display the Reset options Yes or No. Press to change the option
from Yes to No and back again. To accept the setting, press which brings the
balance back to the parameter heading, RESET in this case.
SAVE YOUR SETTINGS AND EXIT THE MENUS
After parameters have been set, press repeatedly until the end of the menu is
reached. End is displayed, press one time then press repeatedly until
End
MENU
is displayed, and press to return to weighing.
H
O
W
T
O
HOW TO