OGSI MOGS - 100, Installation, Operation And Maintenance Manual

Page: 10 / 67

Effective 11/2010 4
The Return Authorization Number must be visibly written on the outside of the package
of the returned Products, component parts or equipment as applicable or OGSI will not
accept the return.
Note: A Credit Certificate will be created for all Warranty Exchange transactions.
OGSI will provide the Credit Certificate with an invoice at the time of shipment to the
original user. The
Credit Certificate
must be included in the package to
OGSI
with the
returned products within 30 days of the date of the invoice. Failure to return Warranty
Exchange Products to OGSI within 30 days will make the Warranty Exchange process
void and payment for Products will be billed and due on receipt.
Note:
The warranties of
OGSI
as set forth herein shall also become null, void and not
binding on OGSI if a defect or malfunction occurs in the Products or any part of the
Products as a result of:
a) A failure to provide the Required Operating Conditions for the Products
( See Page 25)
b)
Repair, attempted repair, adjustment or servicing of the Products, or any
component parts or equipment that constitutes part of the Products by anyone
other than an authorized representative of OGSI. The authorized service
representative must obtain prior approval from
OGSI
‟s S ervice Manager before
performing any warranty work.
c) External Causes (e.g. flood, hurricane, tornado, fire, any natural disaster, or any
event deemed an act of God).
Molecular Sieve Replacement:
The breakdown of the molecular sieve inside the generator (dusting of the sieve)
only occurs if excess water/oil is entrained in the feed air stream. Under no circumstances
is the molecular sieve covered under any warranty by OGSI . If sieve dusting occurs on
your machine, check the air compressor, air dryer and filter elements.
Other Matters:
OGSI is not liable for any special, indirect, punitive, economic, incidental or
consequential losses or damages including without limitation, loss of use, malfunction of
OGSI
products, replacement oxygen charges, delays or lost savings related to the
Products or otherwise even if OGSI shall have been advised of the possibility of such
potential losses or damages.
Limits of Liability
OGSI
Oxygen Generator products shall not be used for breathable or medical oxygen
applications, unless they are assembled with the appropriate support equipment, tested, and
operated in compliance with either American, Canadian or ISO norms for hospital oxygen
systems.