www.offgridtec.com
— 3 —
2.
General Information
2.1.
Overview
The MPPT PRO-X solar charge controllers represent the new generation of Offgridtec MPPT charge
controllers and were developed in cooperation with the company EPSolar Technology. The function
of limiting the charging power and current, as well as the automatic reduction of the charging power,
increase the stability even when connecting oversized PV modules and at high temperatures. The
IP33 rating and isolated RS485 design improve the reliability of the controller and meet the
requirements of various applications.
With its optimized MPPT control algorithm, PRO-X series controllers can minimize the MPP loss rate
and MPP loss time, track the maximum power point (MPP) of PV system quickly and accurately, get
the maximum energy from solar modules under all conditions, and increase the energy utilization
ratio in solar system by 10-30% compared to PWM charging method.
PRO-X series controller owns a three-stage charging mode, which can effectively prolong the battery's
lifespan and significantly improve the system performance. Comprehensive electronic protection of
overcharge, over-discharge, PV & battery reverse polarity, etc., ensures the solar system is more
reliable and durable. This controller can be widely used for RV, household systems, field monitoring,
and many other applications.
Features
：
CE certification (LVD EN/IEC 62109, EMC EN61000-6-1/3)
100% charging and discharging in the working environment temperature range
LCD unit
High quality and low failure rate components of ST or IR to ensure the service life
Advanced MPPT technology & ultra-fast tracking speed guarantee the tracking efficiency of
up to 99.5%
Maximum DC/DC transfer efficiency is as high as 98.5%
1)
; full load efficiency is up to 97.2%
1)
Advanced MPPT control algorithm to minimize the MPP lost rate and lost time
Accurate recognizing and tracking of multi-peaks maximum power point
Wide MPP operating voltage range
Support the lead-acid and lithium batteries; voltage parameters can be set on the controller
2)
Programmable temperature compensation
Limit charging power & current over the rated value
Real-time energy statistics function
Power reduction automatically over-temperature value
Multiple load work modes
Comprehensive electronic protection
Isolated RS485 with 5V/200mA protected output for no power devices, with Modbus
protocol
Support monitoring and setting the parameters via the APP or PC software
IP33
3)
Ingress protection
1) MPPT PRO-X 30/40A@48V system
2) For the BCV, FCV, LVD, and LVR, users can modify them on the local controller when the battery type is "USE."
3)
3-protection against solid objects: protected against solid objects over 2.5mm. 3-protected against sprays to 60
°
from the vertical.
