User manual
Art. 55-106 M101
Rev. 0 03.2019
pag.
24
Offel s.r.l.
Via Lato di Mezzo, 32 48022 Lugo RA - Italy Tel. +39 0545/22542 [email protected]
www.offel.it
8. DVB-T/T2
STARTING THE DEVICE:
Press the POWER ON / OFF button and switch on the instrument.
Select DVB-T/T2 in the main menu (fig.127): the list of TV/Radio channels will appear on the screen.
Fig. 127
Fig. 128
Fig. 129
LEVEL INDICATORS:
Fig. 130
Fig. 131
By pressing the LEVEL button it is
possible to display the signal levels of the
channel you are watching on the screen
in real time (fig. 130-131).
8.1 LEVEL MEASURE MENU
Fig. 132
Pressing the MENU button enters the terrestrial menu (fig. 132).
Selecting LEVEL MEASUREMENT starts the measurement.
It is possible to carry out both ANALOG and digital DVB-T/T2
measurements.
DVB-T/T2 LEVEL MEASUREMENT:
In the TERRESTRIAL LEVEL menu under SYSTEM select DVB-T (fig. 133). Use the RIGHT / LEFT buttons to select
the CHANNEL you want to measure, or go to FREQUENCY and enter the desired frequency and select a bandwidth
of 1.7, 5, 6, 7 or 8 MHz for DVB-T / T2 .
Since there may be some amplifiers on the terrestrial TV antennas, it is possible in this case to select a supply voltage
of 5V, 12V, 20V at the output.
Fig. 133
Fig. 134
Fig. 135
