User manual
Art. 55-106 M101
Rev. 0 03.2019
pag.
13
Offel s.r.l.
Via Lato di Mezzo, 32 48022 Lugo RA - Italy Tel. +39 0545/22542 [email protected]
www.offel.it
NIT RECOGNITION:
By moving the IF frequency slider to a signal in the SPECTRUM menu, it is possible to automatically find the channel
list and the Satellite position in Uplink by pressing the ENTER button (fig. 41).
Fig. 41
Fig. 42
NOTE: the name of the satellite may be incorrect due to the information contained in the NIT data supplied by the
transmission company. This can also occur when the transmission company transmits to 2-3 satellites simultaneously.
Fig. 43
Fig. 44
By pressing CHANNEL LIST (fig. 42) it is possible to display the channel lists (fig. 43) and with the SAVE CHANNELS
function (fig. 44) record the channels in the memory with the universal LNB set.
6.4 TRANSPONDER CONTROL MENU
Fig. 45
Press the MENU button and select TP CONTROL from the main menu.
This menu also allows you to check the signal levels of multiple frequencies
simultaneously.
CONTROL OF A SINGLE SATELLITE:
Fig. 46
Fig. 47
In the TYPE section select SINGLE and
press ENTER after having set the
necessary settings (Satellıte, DiSEqC,
Door).
As shown in fig. 47, it is possible to
display the signal levels of 4 different
frequencies of a single satellite on the
same screen. In this way it is possible to
check if the signal levels and the satellite
dish setting are correct at all frequencies
or not.
