User manual
Art. 55-106 M101
Rev. 0 03.2019
pag.
23
Offel s.r.l.
Via Lato di Mezzo, 32 48022 Lugo RA - Italy Tel. +39 0545/22542 [email protected]
www.offel.it
CHANGE THE CHANNEL LIST:
Fig. 121
To modify the list of channels, go to the channels, press the EDIT button, select
one of the DELETE or MOVE options (fig. 121) and select the channel you
want to edit.
Select the channel again when you want to delete it or move the cursor to the
chosen position, when you want to reposition it.
After completing the process, pressing ENTER can exit by answering YES to
the question "Do you want to save the changes?".
7.7 CATV SETTINGS
Through this menu (fig. 122) it is possible to change the QAM / DVB-C settings (fig. 123).
POWER UNIT: it is possible to measure the power level in dBuV, dBm or dBmV.
CALIBRATION: you can calibrate the level if you think the signal measurement indicator is low or high.
MINIMUM AND MAX POWER: it is possible to change the intensity level of the measurement.
BER MAX: it is possible to modify the maximum BER limit both pre and post-Viterbi.
Fig. 122
Fig. 123
7.8 PIANO FREQUENCIES
Through this menu (fig. 125) it is possible to modify the frequencies suitable for the region in which the service is
provided.
In this way the settings adopted in the frequency plan will be displayed in all the other menus with consequent time
savings. Please always check the correctness of the settings.
Fig. 124
Fig. 125
Fig. 126
You can scan all channels and check memory data for CATV frequency plans and channel lists (fig. 125-126).
