User manual
Art. 55-106 M101
Rev. 0 03.2019
pag.
22
Offel s.r.l.
Via Lato di Mezzo, 32 48022 Lugo RA - Italy Tel. +39 0545/22542 [email protected]
www.offel.it
7.4 TILT/LIMIT MENU
Fig. 110
Fig. 111
Fig. 112
The Tilt / Limit test is an efficient solution to check the order of the cable system and the further weakening of the
signal at high frequencies. It is possible to acquire the signal levels of 12 channels (fig. 111) and easily observe the
measurement result thanks to the graphic display (fig. 112). It is possible to select the first 6 frequencies of the group
starting from the beginning of the television band and the last 6 frequencies starting from the end. Then you can control
the slope and arrange the amplifiers and distribution elements based on this inclination.
7.5 SEARCH TABLE MENU
Fig. 113
Fig. 114
Fig. 115
The channel scan function allows you to quickly test the order and gain of the DVB-C QAM cable TV system. It is
possible to select the range of steps and the end frequencies and scan all the signals within the band on one of the
bandwidths of 6, 7 or 8 MHz (fig. 113-115).
Fig. 116
Fig. 117
Fig. 118
A table similar to that of fig. 116 will appear after scanning the selected band. Going to a frequency in the table and
pressing ENTER it is possible to measure the channel in real time (fig. 117).
Then pressing the EDIT button it is possible to download the signal parameters to a USB memory (fig. 118).
7.6 CHANNEL LIST
Fig. 119
Fig. 120
You can view the list of channels from
the main menu (fig. 119) or while
watching a channel by pressing the
ENTER button (fig. 120).
