manualshive.com logo in svg

OETIKER ELK 02 Series, Instruction Manual, Page: 52 / 144

Share
Download
OETIKER ELK 02 Series Instruction Manual Download Page 52

OETIKER ELK 02 V2.X

8 

Structure of the PC program

Issue 05.2021

08903352

8-52

START system settings

Defines the START at the trigger unit or at the pincer’s extended trigger along with the inputs at the Start/
Acknowledge interface X2 and the Enable and Start interface X20.

INFO

“Start” means that a closure in accordance with the “closure function” has been initiated.

Fig. 36 

START system settings

Input box/checkbox

Description

Start / acknowledgement 
via START button or 
external control

• 

START button

• 

External control

• 

 START button or 
external control

START button in the trigger unit EL or in the extended trigger ELT.
External control via the X2 or X20 interfaces 

Start only via START button
Start only via:
• 

X2 Start/Acknowledge

• 

X20 Enable and Start

Start via START button or
• 

X2 Start/Acknowledge

• 

X20 Enable and Start

Summary of Contents for ELK 02 Series

















































































































































Reviews:

No comments