1
Description
1.1
Design and Operation
The
TURBOVAC
models 35 LS to 1000 are turbomolecular pumps featuring
grease-lubricated bearings. These units are engineered to pump vacuum
chambers down to pressures in the high-vacuum range.
A TURBOTRONIK
frequency converter and a forevacuum pump are required for the operation of
the
TURBOVAC
.
1.2
Supplied Equipment
The
TURBOVAC
is shipped in a sealed PE bag which also contains a desic-
cant. The maximum effective life of the desiccant is one year.
TURBOVAC 35 LS / 35 LS2
The pumps are shipped without splinter guard or connection accessories.
TURBOVAC 50 to 1000
For high-vacuum port with ISO-K flange:
Splinter guard, centering ring with FPM sealing ring; outer ring.
For high-vacuum port with CF flange: Splinter guard.
For high-vacuum port with KF flange: Splinter guard, centering ring with FPM
O-ring and clamping ring.
For high-vacuum port with ANSI flange: Splinter guard.
Forevacuum port: Centering ring with O-ring and clamping ring.
Both the purge gas port and the airing port are blanked off for shipping.
In addition the pivoted threaded fittings used to make the coolant connection
are included as standard equipment for the TURBOVAC 151, 361 and 600; if
needed, they can be used to replace the hose nipples installed at the factory.
The electronic frequency converter and the connector cables required for
operation are not included as standard equipment with the pump.
——————————
PE = Polyethylene
FPM = Fluoroelastomer, resistant to temperatures of up to 150
°
C (300
°
F)
Description
6
GA05118_1502 - 12/2006 - © Oerlikon Leybold Vacuum
