17
5.
Remove the Input Sun Gear (6) if applicable.
6.
Remove the Input Shaft (9) from Hub-Spindle Subassembly.
7.
Lift out the Input Carrier Subassembly from Hub-Spindle Subassembly.
CAUTION:
Safety glasses must be worn during these next steps.
8.
UnInstall four bolts (14) from the Adaptor Mounting (12)
in steps using an ‘X’ pattern to
ensure that brake piston remains straight while being releasing compressed load out of
brake cavity of spindle
9.
Remove the Adaptor Mounting (12) from Hub-Spindle Subassembly
10.
Remove the O-ring (10B) from Adaptor Mounting (12).
11.
Remove the Input Coupling Subassembly from the Hub-Spindle Subassembly.
12.
Remove the Input Brake Subassembly out of Hub-Spindle Subassembly (Refer page 21 for
detailed Input Brake Disassembly).
This concludes the Main Disassembly.
Summary of Contents for Torque-Hub C014C5 Series
