Oerlikon Fairfield Torque-Hub C014C5 Series, Service Manual

Page: 21 / 52

21
Planetary Final Drive Service Manual
Input Brake Disassembly
1. Place Hub Spindle Subassembly such that the flange side is up.
CAUTION: Safety glasses must be worn during these next steps.
2.
Remove four bolts (14) from the Adaptor Mounting (12)
in steps using an ‘X’ pattern to
ensure that brake piston remains straight while being releasing compressed load out of
brake cavity of spindle
3.
Remove the Adaptor Mounting (12) from Hub-Spindle Subassembly
4.
Remove the O-ring (10B) from Adaptor Mounting (12).
5.
Remove the Brake Springs (10K) from the Brake Piston (10A) .
6.
Remove the Brake Piston (10A) out of the Hub-Spindle Subassembly.
7.
Remove the Backup Ring (10E) and the O-ring (10D) from groove in Spindle (1A).
8. Remove the Backup Ring (10C) and the O-ring (10B) from groove in Piston (10A).
9. Remove the Lobed Stators (10H/10F) and Rotors (10G) from the spindle counter bore.
Continued on Next Page