SW22
8
User
manual
P1630830G
3 – OPERATING MODE
Modes of operation are listed below and can be selected in the system menu “MODE”
3.1
Weighing with totalization
( Rif. MODE : STD )
3.2
Weighing with partial zeroing
( Rif. MODE : AZZER )
3.3
Animal weighing
(
Rif.
MODE
:
PES-AN
)
3.4
Counting mode
( Rif. MODE : COUNT )
3.5
Unload weighing
( Rif. MODE : SCAR)
3.6
Checkweigher
(
Rif.
MODE
:
TOLL
)
3.7
Truck scales
( Rif. MODE : WBR )
3.8
Peak
(
Rif.
MODE
:
PICCO
)
3.9 Receipt batch
(
Rif.
MODE
:
RICETT
)
3.10
Simple
batch
( Rif. MODE : DOSAGG )
3.1 – Weighing with totalization
In this operating mode, pressing the key
it is possible to add the value of every single
weight to the actual stored value.
If a printer is connected to the indicator, a ticket will be printed according to the programmed
parameters.
3.1.1 - Reversal weighed
Press keys
e
in sequence you can cancel a weighing operation performed
incorrectly, if a sequence of weights is opened, namely: subtotal different from 0.
The display shows "00000.0" and waits for the weight value to be reversed typed from the
keyboard and confirmed with the button
; the display shows "000000" and waits for the
progressive of the receipt to reverse typed from the keyboard and confirmed with
If there is a printer, a receipt is issued in accordance with the active mode with the given
weight and number of pieces preceded by the sign "-".
3.1.2 - Reprint receipt
It is possible to reprint a receipt printed by pressing the key
for 3 seconds .
3.1.3 - Print Subtotal
At the end of a sequence of weighings, the operator may ask to view and print the subtotal, ie
the sum of the weighted up to that time.
If you press and hold for 3 sec. button
,
appears on the display for 3 seconds the value of
the total in memory, and if a printer is connected, the subtotal printing operation is performed
according to the programming mode active.
After this the subtotal is reset and its value is added to the total.
3.1.4 - Print grand total
The Grand Total is the sum of all SubTotal executed since the last reset of the same.
If you press and hold for 3 sec. button
(with Subtotal = 0) the display will show for 3
seconds the value of the Total General.
If a printer is connected, a receipt is issued according to the programming mode activated.
The operator also has the option to cancel the data displayed, or just to keep it in memory in
which case the next Total Partial still be added to the current value.
To proceed with the reset value of the press
, while
allows you to exit without
resetting.
3.1.5 - Print Total article
