SW22
10
User
manual
P1630830G
counting and sequentially press the
and keys.
To clear the stored value of the average piece weight, and press keys
e
in sequence.
3.4.3 - Aggregation Weight / Piece
When you press
the weight and the corresponding number of pieces on the balance is
added to the totals currently in memory.
If you have activated an identification code, is also updated total weight and total pieces
related to that code.
If there is a printer, a receipt is issued according to the programming mode active (type
printer: TST1-DEVICE and card type: CARTEL).
Remain unchanged functions of Partial Aggregation Aggregation and General've seen
previously in paragraphs 3.1.3 and 3.1.4 as well as the ticket reprint function (see point 3.1.2)
3.4.4 - Reversal Weight / Piece
Press keys
and
in sequence you can cancel a weighing operation performed
incorrectly, provided it is open a sequence of weights, namely: subtotal different from 0.
The display shows "00000.0" and waits for the weight value to be reversed typed from the
keyboard and confirmed with the button
;
the display shows "000000" and waits for the
number of pieces you want to deduct from the total, typed from the keyboard and confirmed
with
, then the display will show "000000" and waits for the receipt to reverse progressive
typed from the keyboard and confirmed with
If there is a printer, a receipt is issued in accordance with the active mode with the given
weight and number of pieces preceded by the sign "-"
3.4.5 - Display items - PMU - Net Weight
Press keys
and
F2
in sequence switches the display mode of the number of pieces to that
of the Average Piece Weight and pressing
F2
again, the Net Weight.
Leaving the selected display mode of the Average Piece Weight, after 3 sec. The system
automatically returns to the display mode of the number of pieces.
3.4.6 - Total Print article
The third operation of Total that the terminal SW-22 provides the operator, is that of Total for
Item, ie the sum of all items divided by commodity code.
Press keys
e
in sequence and prints the total weight of all items with a value other
than 0; in this case, the reset request concerns the total of all codes (ENTER = YES; ESC =
NO).
3.4.7 - Display Subtotal
Press keys
and
TOT
in sequence and the value of the subtotal currently achieved is
displayed for 3 sec.
3.5 - Weighing discharge
Selecting this mode will be possible, starting from a full container, display the weight taken
from it.
To start viewing the unloaded weight, starting with a load placed on the scale, press keys
and
in sequence.
The display is cleared and removing weight from the scale, its value is displayed in the positive
on the display. Pressing keys
and
F1
in sequence will be displayed for 3 seconds. the
weight on the scale yet. To return to normal weight, while maintaining operational mode
exhaust weighing in, press
and
F1
.
The functions described above are also connected to the relays in case this is the card I / O so
as to realize a repeated dosing of a predefined quantity, starting from a full container placed
on the weighing plate.
