SW22
15
User
manual
P1630830G
The header will be printed only at the beginning of the ticket
<DOUBLE>
This option allows to obtain a double copy of a ticket
4.5 HEADER : Ticket Header
It is possible to store three header lines that will be printed at the beginning of the ticket.
It is possible also to choose the kind of the character : normal , double height, bold.
The number of characters depends on the kind of character : 24 chrs for normal type and 12
chrs for the other types.
<WRITE>
Input mode. Every character will be input with the ASCII code.
At the end , insert the code “004”.
<CANCEL> Clear stored data.
4.6 BL COD : Code locked
It is possible to lock the numeric code for all the operations till the next change :
<ON> : Locked code
<OFF> : Unlocked code
4.7 SICUR : Administrator Password
The administrator password allows to limit the access to the programming menu.
Input the old password and then the new password
The supervisor password 14556 allows the access in every condition.
4.8 ST-BAR : Bar code printing
It is possible to print an EAN-13 bar code on a single ticket
<ON> : Barcode printing on
<OFF> : Barcode printing off
The EAN-13 code contains:
· N° 1 digit for identification variable weight ( fix char);
· N° 6 digit for identification product code
· N° 5 digit for identification net weight
· N° 1 digit for check-digit
4.9 M-FISC: Reading and Printing Fiscal Memory
This option is enabled only if an optional memory thanks to which each weigh is stored in non-
volatile memory accessible only upon explicit request.
The capacity of this memory allows you to store up to 160000 weighed.
4.9.1 REG-F
Reading Memory Register
By setting the address of the desired location, (0 to 960000) will display the weight data it
contains.
If the lease is still empty the message "NOCODE" And if there are a weighted value is
displayed alternately weight saved on the record date.
4.9.2
Memory
Enables printing of all weighing in the fiscal memory. To stop the printing press
