SW22
11
User
manual
P1630830G
3.6 – Checkweigher
Selecting this option only works with Multi-field is not enabled, the 2 LEDs : are used to
indicate if the weight scale is inside or outside (positive or negative) of a target range; if there
is also the optional I / O outputs are also provided on the relay.
In this mode, the sequence of commands
and
Set
has a different meaning from the
standard as it gives access to the procedure for selecting the mode of implementation of the
audit tolerance.
Menu items can be selected using the keys
▼
and
▲
are:
1. Target
2. Limit
Selecting Target with the key
you can enter a target value of weight and the amount of
variation allowed in higher or lower.
Selecting Limit (with the button
) the display will show the initials LL (lower limit) and after
00000.0; type the desired value for the lower limit and confirm; the display shows the symbol
UL (upper limit) and after 00000.0; Enter the desired value for the upper limit and confirm
with
.
After the initial setup, any weight placed on the weighing pan is evaluated and the LED lights
C1 indicates that the weight is less than the lower limit, the LED lights C2 indicates that the
weight is greater than the upper limit while the ignition LEDs C1 and C2 indicates that the
weight is within the two values. At the same time, if you have the optional relays, three relays
are associated with the three LEDs provide similar outputs.
3.7 – Truck scale
3.7.1 – First weighing
By pressing
the weight on the scale is considered first weighing value associated with an
identification number of memory which will allow the call at second weighing.
The maximum allowed number of first open weighs (ie operations not closed by a second
weighing) is 100.
The print is made using the methods of programming active (type printer: TST1-DEVICE and
card type: CARTEL).
3.7.2 - Second weighing
By pressing
the weight on the scale is taken as the second weighing; Therefore, the
operator will be asked to enter the ID code memory on the first weighing is carried out with
respect to which the calculation of the net weight resulting from the difference between the
two weighings.
The calculated value is added to the total currently present in memory, and, if you have
activated a commodity code, the same weight is added to the total also related to that product
category.
The print is made using the methods of programming active (type printer: TST1-DEVICE and
card type: CARTEL).
3.7.3 - Printing single weighing
It is also possible to make a single weighing operation which therefore will not be added to the
queue of raw weighted assets.
Pressing the keys and the weight on the scale is added to the total currently present in
memory, and, if you have activated a commodity code, the same weight is added to the total
also related to that product category.
The print is made using the methods of programming active (type printer: TST1-DEVICE and
card type: CARTEL).
3.7.4 - Display queue first weighed
By pressing the
and
F1
key, you can display the identification codes of the memory of the
first weigh still open.
