OCULUS ImageCam 3, Instruction Manual

Page: 34 / 76

11 Viewing the Images
28 / 68 Instruction Manual ImageCam® 3 (G/69200/XXXX/EN 0120 Rev01)
You can also select an image/ video directly from the full view. This
applies for both single image display mode and for the active window of
four image display mode.
11.3 Display Image
11.4 Zooming an Image and Panning an Image Section
You can zoom in and out and select image sections in both one window
display mode and four window display mode.

Press one of the buttons to proceed to the next examination or to
return to the previous one.
The respective image / video is loaded.

ImageCam® 3 Programme > View
One window mode: image appers in the max. available size.
Four image mode:

Click on the image and drag it with the mouse into the desired frame.
A frame is activated by clicking on the image with the mouse. All
operations are only executed on the active frame which is marked white.
Combined image mode:
The four image display mode must first be activated in order to activate
combined image mode.
When you zoom in a section of an image, sect. 11.4, page 28 , the same
image section is zoomed in in the other three images at the same time.
If you pan an image with the hand tool, sect. 11.4, page 28 , the other
three images are also panned.
In the 1:1 presentation, one screen pixel is equal to exactly one point of
the actual image.
The image is adapted to the size of the window (one window display
mode or four window display mode).