OCULUS ImageCam 3, Instruction Manual

Page: 23 / 76

9 Preparing for Capturing Images
Instruction Manual ImageCam® 3 (G/69200/XXXX/EN 0120 Rev01) 17 / 68

Select an exposure programme from the drop-down list, fig. 9-6,
page 15, item 3 .
If you have created your own exposure programmes, these are
displayed in this list, see
sect. 9.3.4, page 19 .
If necessary, you can adjust the white balance, sect. 9.3.3, page 17 .
9.3.3 Adjust the White Balance
The light conditions in the examination room can be very different. The
light spectrum, i.e. the colour of the slit lamp illumination, also depends
on many factors. To capture an image/video in colour, the white balances
should be adjusted:

After installation of the ImageCam® 3

Whenever the colour fidelity is not good

Adjust the white balance separately for every configured exposure
programme,
“Use Shortcut to Select an Exposure Programme” on
page 16

Then save the white balance for the respective configuration.
Fig. 9-9: Drop-down list “Exposure programmes”
Symbol
Exposure
programme Description
Exposure pro-
gramme White balance
User-defined ex-
posure program-
mes, see
sect. 9.3.5,
page 21
When necessary
Diffuse lighting

Adjust the white balance
with the slit lamp
brightness typical for this
illumination type.
Fundus
Optical section

Adjust the white balance
at the maximum slit lamp
brightness.
Fluo