OCULUS ImageCam 3, Instruction Manual

Page: 2 / 76

Instruction Manual ImageCam® 3 (G/69200/XXXX/EN 0120 Rev01) i / v
Notes on this
Instruction Manual
The ImageCam® 3 software was manufactured and tested under strict
quality criteria. You have selected a modern and well-engineered product.
To ensure safe operation, it is essential that you use the ImageCam® 3
software correctly. For this reason, you should thoroughly familiarize
yourself with the contents of this instruction manual before operating the
device. In particular, pay attention to the safety instructions!
 This operating manual describes the management of the patient
data, how to perform an examination, and the presentation options
for the captured, single images.
 The operating manual for the beam splitter can be found in the
Appendix
(sect. 19.1, page 65) .
Due to ongoing development, the diagrams shown here may vary slightly
from the actual software delivered.
If you have any questions or would like additional information about your
device, please do not hesitate to contact us by mail or fax. Our team will
be happy to assist you.
OCULUS Optikgeräte GmbH
OCULUS is certified according to DIN EN ISO 13485, setting high stan-
dards of quality for the development, manufacture, quality assurance and
service of the entire range of products.