Ochsner AIR HAWK 518, Design And Installation Manual

Page: 31 / 60

PIA_982030_AIR_HAWK_518_in_EN | www.ochsner.com 31
Appliance installation
»
Slide the right-hand appliance casing panel down
from the top along the frame of the appliance, until
the panel clicks into place at the bottom.
»
Ensure that the appliance casing panel is fully en-
gaged at the 3 points along the bottom.
»
Secure the appliance casing with screws at the fixing
points provided, inside the control box.
»
Place the control box cover on the appliance frame.
Slide the control box cover forward.
»
Secure the appliance casing with screws at the rear
of the indoor unit.
9.2 Installing the outdoor unit
9.2.1 Delivery and transportation
The appliance is delivered on a one-way pallet, wrapped
in film. The appliance casing is assembled on delivery.
Note
Should you notice any transportation damage to
the appliance, you must report such damage im-
mediately when the delivery is unloaded. Claims
for transportation damage cannot be made sub-
sequently.
Material damage
»
Protect the appliance from damage by using
lifting slings.
»
When transporting, protect the appliance from
impact.
► The appliance is secured to the one-way pallet of the
transport packaging with screws.
► The transport packaging or one-way pallet is suitable
for transportation using a forklift truck.
► For level transportation to the installation location, the
appliance may remain in the transport packaging.
► Leave the appliance in the transport packaging or on
the one-way pallet for lifting and moving by crane or
forklift.
► The standard packaging of the appliance does not
provide protection against the weather or sea water.