32
www.ochsner.com | PIA_982030_AIR_HAWK_518_in_EN
Appliance installation
►
The appliance may be stored and transported only at
temperatures of between -20°C and +45°C.
►
The appliance must be stored in its transport
packaging.
Please note the following when removing the transport
packaging:
»
Remove the transport packaging.
»
Undo and remove the 4 woodscrews securing the ap-
pliance to the one-way pallet.
9.2.2 Positioning the appliance
»
Position the appliance on the prepared foundations.
»
Secure the four legs of the outdoor unit on the foun-
dations, using 4 fixing screws.
9.2.3 Disassembling the appliance casing
By removing the side appliance casing panels on the out-
door unit, you can gain access to the connection points
for the refrigerant lines and to the terminal boxes for the
electrical control and power supply cables.
»
Undo and remove the two fixing screws on the
underside.
»
Pull the side appliance casing panel down and away.
9.2.4 Installing the snow cover
The snow cover for the outdoor unit fan is supplied loose.
»
Undo and remove 4 of the 8 fixing screws on the
ring-shaped casing section of the fan (M5x12 mm,
stainless steel).
Summary of Contents for AIR HAWK 518
