INSTALLATION | Appliance installation
982000-AIR-M2-M4-EN03.1 | www.ochsner.com 29
»
Undo and remove the four woodscrews securing the
appliance to the one-way pallet.
10.2.2 Positioning the appliance
»
Position the appliance on the prepared foundations.
»
Secure the four legs of the outdoor unit on the foun-
dations, using four fixing screws.
10.2.3 Disassembling the appliance casing
By removing the side casing panels on the outdoor unit,
you can gain access to the connection points for the re-
frigerant lines and to the terminal boxes for the electrical
control leads and power supply cables.
»
Undo and remove the two fixing screws on the
underside.
»
Pull the side appliance casing panel down and away.
11_02_200_504_01_009
10.2.4 Installing the snow cover
The snow cover for an outdoor unit fan can be retrofitted.
11_02_200_504_01_005
»
Undo and remove four of the eight fixing screws on
the ring-shaped casing part for the fan (M5x12 mm,
stainless steel).
11_02_200_504_01_006
1
2
1 Round stainless steel plate
2 Mounting foot with threaded pin (4 pce, M5)
»
Attach the four mounting feet of the snow cover to the
outdoor unit, by screwing the threaded pins into the
four free screw holes in the ring-shaped casing part.
»
Attach the round stainless steel plate of the snow
cover to the four positioning feet (M5x12 mm, stain-
less steel).
10.2.5 Fitting the cylindrical silencer
i
Information
The Super Silent Paket (SSP) exclusively available
ex works for a VHS-M outdoor unit reduces noise
by up to 3 dB. The Super Silent Paket consists of:
- One cylindrical silencer per fan
- Reinforced casing insulation
- Shielded refrigeration technology
The cylindrical silencer from the super silent package
(SSP
) can be retrofitted.
A retrofitted cylindrical silencer
alone will reduce noise by about 1.5 dB.
