EXPLORE
E7
2 0 1 9 I N S T A L L & O P E R A T I O N M A N U A L
19
To ease the removal process, another screw can be removed to act as a breather.
4. Place the removal tool under the head of the undone screw making sure that the screw engages with the slot
on the removal tool, then fasten the screw in a clockwise motion. By tightening down the screw the light
cartridge will be pulled out of the mounting tube.
5. Finish pulling the light cartridge out by hand with the help of the tool to fully remove it from the mounting tube.
4.3 LIGHT CARTRIDGE REMOVAL – Extended Mounting Tube
Before proceeding with this operation, you MUST seek permission from either the manufacturer or your
OceanLED representative.
DO NOT remove the light cartridge from the mounting tube during installation. The light cartridge MUST stay
fitted inside the mounting tube throughout the installation process to avoid the introduction of potential
contaminants that may damage the product.
Additional Tools needed that are not supplied by OceanLED
T-Handle Allen key (2mm) 80mm length.
1. Turn power off and unplug all the connectors on the back of light.
2. Remove the locking ring and the compression tube from the mounting tube.
