TecLINE T2, User Manual

Page: 1 / 2

1/2
www.teclinediving.eu
DIVE LIGHTS TECLINE T2 / T6
USER MANUAL
Thank you for choosing Tecline T2 / T6 dive light.
Should you have any questions, please contact us via e-mail: scubatech@scubatech.pl .
PURPOSE AND FUNCTION
 Tecline T2/T6 dive lights are designed for underwater use.
 To turn the torch on and off, press and hold the control button for 2-3 seconds.
 To switch between the operating modes (100% / 50% / 20%) briefly press the control button.
 A quick, double press on control button activates the "boost" mode. The light output is then 2000
lumens (for Tecline T2) or 6000 lumens (for Tecline T6 torch). Note: the "boost" mode significantly
shortens the burning time of the T6 light (over a dozen of minutes).
 The light under the control button indicates the battery status (voltage):
- green light: 4.2-3.6 V – red light: 3.5-3.2 V – blinking red light: 3.1-2.7 V. The light switches off
automatically when the voltage drops to 2.6 V.
 The light can be easily operated with one hand.
WARNING!
! ) Avoid looking directly into the beam. The light may permanently damage your eyesight.
! ) Avoid using the light out of water. Overheating may damage the LED cell.
! ) Do not open the battery compartment under water. Water in the battery compartment may damage
the light and/or the battery. Such damage is not covered by warranty.
MAINTENANCE AND STORAGE
 The light should be thoroughly rinsed in fresh water after every use.
 All o-rings should be replaced every 12 months.

The light should be stored in a dry place at room temperature.
PARAMETERS
 Material: Aluminium T6061 with hard anodised coating
 Source of light: LED cell with a lifetime of 50 000 hours

Luminous power:
- Tecline T2: 1500 lumens / 2000 lumens (in „boost” mode)
- Tecline T6: 2500 lumens / 6000 lumens (in „boost” mode)
 Light temperature: 6000K – 6500K
 Light focus: 8-10 o
 Maximum operational depth: 150m
 Control button SS316 with battery status control light

Modes of operation: 100% - 50% - 20% - additional „boost” mode

Burning time in the default mode (100% power):
- Tecline T2: 125min
- Tecline T6: 75min
 Net weight: 240g (without battery)

Power supply: Li-Ion Battery 26650