Outdoor Sauna Asssembley Manual
Install Benches
Oceanic Saunas Ltd
16
Fig 16e Corner Bench Fixing
Fig 16d Bench Fixings
Fig 16c Add Benches
Fig 16a Joint Overlap
Fig 16b Joint Overlap
50mm
16.1 Overlap Mould
i.
Measure, cut and pin lengths of 50mm overlap mould along the joints of
the wall and ceiling panels (interior only).
ii.
When fitting overlap mould above a bench end rail leave a 20mm gap
for the bench slats to meet the wall.
16.2 Add Benches
i.
Position the benches on top of the end rails as per the layout in the
parts list.
ii.
Fix the end of the bench subframe into the bench rail with 2No 50mm
screws and 30mm washers as shown in Fig 16.3
iii.
For corner ‘L’ Benches fix through the side of the perpendicular bench
using 2No 50mm screws and 30mm washers.
20
50
9
