Outdoor Sauna Asssembley Manual
Bench Assembly
Oceanic Saunas Ltd
13
20mm screws
Bench Slat
Corner mould spacer
Scrap timber
Square corner
work bench
Large Bracket
20mm
Spacer
Fig 13a. Work Bench Layout
Fig 13c. Add frame and cross members
Fig 13b. Supporting Frame
Fig 13e. Add frame and cross members
Fig 13d. Fix Cross Members
Large
Bracket
L Bracket
30mm
20mm
13 Build Benches
i.
On a workbench use two pieces of scrap timber along the edges of your bench to create a
square corner to work from.
ii.
Screw the supporting frame together using the 4 large brackets and 20mm screws.
iii.
Lay the 5 or 6 bench slats facedown on a work bench. Use small pieces of 19 x 19mm
corner mould as spacers.
iv.
Lay the supporting frame onto the slats, use spacers along the two edges to give a 19mm
overhang each side.
v.
Add the cross members, two are positioned 100mm from the ends, the third is centred.
Refer to parts list for dimensions.
vi.
Evenly space out the 14 L brackets and fix using 20mm screws.
vii.
Use the 30mm screws provided to fix down through the cross members into the slats.
Small L Bracket
100
69
19
19
