manualshive.com logo in svg

Oceanic DATA PLUS, Owner'S Manual

Share
Download
Oceanic DATA PLUS Owner'S Manual Download Page 50

®

40

EXTERNAL ACCESS (EA) MODE

Using special infrared linking hardware and a unique PC software program, data
from your dives can be downloaded (copied) from your DataPlus into an IBM
compatible personal computer program running on a Windows

®

 3.X or Windows

®

95 operating system.  Instructions for performing the interface and download are
provided with the hardware and software package that is available separately at
your Authorized Oceanic Dealer.  Ask for OceanLink™ for DataPlus.

The OceanLink™ program provides dive profiles, nitrogen and oxygen loading
throughout the dive, and a unique interactive DataPlus Simulator that enables
you to view all of the displays and operating modes being described.

External Access Mode, signified by EA (Fig. 50), may be entered when the
control button is depressed and held in for more than 8 seconds while in the
Surface Mode or during the PDPS.  The letters EA appear in the lower portion of
the LCD display  with a count down from '6' to '0' appearing at  the right.  After
counting down to '0', the DataPlus will revert back to the Surface Mode.

WARNING:  Entering the External Access Mode when a Low
Battery condition is indicated after activation will cause the
flashing Low Battery icon to disappear implying that battery
voltage is satisfactory.  DO NOT dive until batteries are replaced.

Fig. 50 - External Access

(EA) Mode

O2

DATA

PLUS

GLO

Summary of Contents for DATA PLUS











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands