manualshive.com logo in svg

Oceanic DATA PLUS, Owner'S Manual

Share
Download
Oceanic DATA PLUS Owner'S Manual Download Page 4

®

iv

WARNINGS:

•  The DataPlus is intended for use by recreational divers who have successfully completed a nationally
    recognized course in scuba diving, and diving with enriched nitrogen-oxygen (nitrox) mixtures.
•  It is intended only for no decompression diving, NOT intentional decompression diving.
•  It must not be used by untrained persons who may not have knowledge of the potential risks and
    hazards of scuba diving, and diving with enriched nitrogen-oxygen (nitrox) mixtures.
•  You must obtain scuba certification, and certification in diving with enriched nitrogen-oxygen mixtures
    (nitrox) before using the DataPlus if you have not already done so.
•  It is NOT for use by military and commercial divers.
•  It should NOT be utilized for any competitive, or repetitive square wave or decompression diving, as it
    is intended solely for recreational use and no decompression multilevel diving.
•  As with all underwater life support equipment, improper use or misuse of this product can cause
    serious injury or death.
•  Never participate in sharing or swapping of a dive computer.
•  Conduct your dives in such a manner so as to insure that you continuously check the computer's
    proper function.
•  Read and understand this owner’s guide completely before diving with the DataPlus.
•  If you do not fully understand how to use this dive computer, or if you have any questions, you should
    seek instruction in its use from your authorized Oceanic dealer before you utilize this product.

Pay special attention to items marked with this Warning symbol.

Summary of Contents for DATA PLUS











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands