manualshive.com logo in svg

Oceanic DATA PLUS, Owner'S Manual

Share
Download
Oceanic DATA PLUS Owner'S Manual Download Page 12

®

2

O2

GLO

DATA

PLUS

DATA

  PLUS

INTRODUCTION

Welcome to Oceanic and thank you for choosing the DataPlus!

Your new DataPlus presents the information that you need before, during, and
after your air (or nitrox) dives using Oceanic's intuitive combination of easy to
read digital displays and unique identification icons.

Tissue loading of nitrogen, accumulation of oxygen, and ascent rate are pre-
sented as segmented bar graphs alongside color coded reference indicators that
bring quick focus to these important status displays.

As you progress through this instructional guide, you will become familiar with
all of the unique functions and features available and see examples of the dis-
plays that you could expect to see in the DataPlus' various operational modes.

The initial time that you invest becoming acquainted with your new DataPlus
will be returned as you enjoy your underwater activities with the comfort that
your familiarization affords.

The DataPlus' wide array of features are described in detail throughout the
pages that follow.  Due to the importance that they be understood thoroughly
prior to using the DataPlus, information will be expanded upon and some
refreshed as you proceed.  Relax and read through the complete guide.

Summary of Contents for DATA PLUS











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands