Oceanic DATA PLUS, Owner'S Manual

Page: 38 / 106

®
28
was a nitrox dive).
If you descend during that first 10 minute transition period, time underwater
will be considered a continuation of that dive. The time at the surface (if less
than 10 minutes) will not be added as elapsed dive time. During the 10 minute
transition period, the Log Mode is accessible and will display that dive's data,
however, data will not be stored in the unit's memory until the 10 minute period
is completed. The PDPS will not appear until after the first 10 minutes.
Once 10 minutes have elapsed, the Surface Mode icon stops flashing (Fig. 34),
and the dive number will advance to show the number of the next dive. The
Surface Sequence will advance screens from Surface Mode., to Time to Fly, to
FO2, to PO2, to PDPS, and repeat once per minute until the next dive is made,
or until the unit enters Fly Mode after 12 hours. Also, that dive is entered into
the memory of the Dive Log, and a subsequent descent will be considered a new
dive. If the TLBG is displayed during the PDPS, limits are being controlled by
nitrogen. If the O2 bar graph is displayed, limits are being controlled by oxygen.
Remember!! FO2 must be set prior to descending on each nitrox dive.
O2
GLO
DATA
PLUS
Fig. 34 - Surface Mode
(after dive >10 min SI)