Oceanic Data Mask, Operating Manual

Page: 83 / 148

83
NOR DIVE NO DECO SAFETY STOP (if set)
Upon ascending to 5 FT (1.5 M) below the No Deco Safety Stop Depth set on any NOR
No Decompression dive in which Depth exceeded 30 FT (9 M), a short beep will be
emitted and a Stop at the Depth set will appear on the display with a countdown timer that
begins at the Stop Time set and counts down to 0:00 (min:sec).
The No Deco Safety Stop will be displayed until the countdown times out, or you descend
below 30 FT (10 M) at which time it resets, or you surface. There is no Penalty if you
surface prior to completing the No Deco Safety Stop.
If the No Deco Safety Stop was set to OFF, the screen will not appear during the ascent.
NO DECO SAFETY STOP MAIN, information includes (Fig. 72) -
> TLBG (Left Bar with TL icon), segments representing
Nitrogen Tissue Loading
> Current Depth with FT (or M) icon
> Tank Pressure with the PSI (or BAR) and Link icons, if a TRTR
is active and linked, flashing after 1 minute of Lost Link
> Nx icon, if a Nitrox dive
> Stop Depth with FT (or M) icon
> STOP Bar icon, flashing during the first 10 seconds.
> Stop Time (min:sec), counting down
 Press and release the A (Top) button momentarily (< 2
seconds aec) to view the NO DECO SAFETY STOP ALT 1
Display.
Fig. 72 - NO DECO SAFETY
STOP MAIN