manualshive.com logo in svg

Oceanic Data Mask, Operating Manual

Share
Download
Oceanic Data Mask Operating Manual Download Page 128

128

If there is any sign of moisture in the Mask's Optics, DO NOT attempt to use the Mask until

it receives proper service.

Prior to each dive operation, the Mask should be activated and Battery status, Button

operations, Backlight operation, and Set Points verified and/or modified, if required.  The

Transmitter should be pressurized and transmitted data verified to be properly received by

the Mask it is linked to.

Your  DataMask should be inspected annually by an Authorized Oceanic Dealer who will

perform a factory prescribed function check and inspection for damage or wear.  To keep

the 2 year limited warranty in effect, this inspection must be completed one year after

purchase (+/- 30 days).

Oceanic recommends that you continue to have an inspection performed every year to

ensure it is working properly.

The costs of annual inspections are not covered under the terms of the 2 year limited

warranty.

To Obtain Service:

Take your DataMask system (Mask and Transmitter) to an Authorized Oceanic Dealer or

send it to the nearest Oceanic Regional Distributor Facility (refer to page 122).

Summary of Contents for Data Mask





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands