Oceanic Data Mask, Operating Manual

Page: 116 / 148

116
> If set OFF, operation will revert to the FRE SURF MAIN screen, bypassing SET FDA 3.
> If set ON, the Depth value displayed will start flashing.
 Pressing and releasing the S (Side) button momentarily and repeatedly (< 2 seconds
each time) will step through the Set Points from 40 to 330 FT (11 to 100 M) in
increments of 10 FT (1 M) at a rate of 1 Set Point per press of the button.
 Pressing and holding the S (Side) button will scroll through the Set Points at a rate of 4
Set Points per second until released.
 Pressing and releasing the A (Top) button momentarily (< 2 seconds) will accept the
Depth Setting and advance to SET FDA 3.
 Depressing the A (Top) button for 2 seconds, or if no button is pressed during a
period of 2 minutes, will revert to the FREE SURF MAIN screen.
SET FDA 3, information includes (Fig. 103) -
> Depth Alarm value with FT (or M) and MAX icons
> Graphic FdA3 (meaning FREE Depth Alarm 3)
> Set Point ON or OFF, flashing
 Pressing and releasing the S (Side) button momentarily
(< 2 seconds) will toggle the Set Point between ON and OFF.
 Pressing the A (Top) button momentarily (< 2 sec) will accept
the ON or OFF Set Point which will stop flashing.
> If set OFF, operation will revert to the FRE SURF MAIN screen.
> If set ON, the Depth value displayed will flash.
Fig. 103 - SET FDA 3