Oceanic Data Mask, Operating Manual

Page: 92 / 148

92
IMMEDIATE VIOLATION AND VIOLA GAUGE MODE
If a Decompression Ceiling Stop Depth much greater than 60 FT
(18 M) is required, an Immediate Violation Mode will be en-
tered. This situation would be preceded by entering Delayed
Violation #2.
The DataMask would then operate in Violation Gauge Mode
during the remainder of that dive and for 24 hours after surfac-
ing. Violation Gauge Mode turns the DataMask into a digital
instrument without any Deco or O2 monitoring functions.
VIOLATION GAUGE MODE MAIN DISPLAY, information includes (Fig. 85) -
> TLBG (Left Bar with TL icon), all 5 segments flashing while the Audible sounds. When
the Audible stops (10 seconds), the TLBG will be removed.
> Current Depth with FT (or M) icon
> Tank Pressure with the PSI (or BAR) and Link icons, if a TMT is active and linked,
flashing after 1 minute of Lost Link
> Nx icon, if a Nitrox dive
> Air Time Remaining with ATR icon (lower/left)
> UP Arrow and graphic Vio flashing. The graphic Vio will continue to flash until 10
minutes after surfacing, then it will alternate with the graphic Nor (or GAU).
 Press/release the A (Top) button (< 2 sec) to view ALT 1, then ALT 2 and ALT 3. ALT 2
is bypassed if FO2 is set for AIR.
 Depress the S (Side) button for 2 seconds to access Set Backlight Level. Refer to page
82.
Fig. 85 - VIOLATION GAUGE
MODE MAIN